|
Sample: Grid2a
Beads |
: Micromod, Sicastar-M plain 1,5µm (1/5000: 5µg/ml) |
Video |
: Test2 |
Area |
: 48,1 x 64,2µm (150x200+420+429) |
The magnetic beads follow the magnetic gradient into the circle.
The actual current is written in the video.
|
|
|
|
Sample: Grid2b
Beads |
: Micromod, Sicastar-M plain 1,5µm (1/20000: 1,25µg/ml) |
Video |
: Test3 |
Area |
: 48,1 x 41,7µm (150x130+558+458) |
- after 28sec: a current flows through the upper conducting line. The
single marker moves into the corner.
- after 47sec: a current flows through the lower conducting line. The
single marker moves into the next corner.
|
|
|
|
Sample: Grid2a
Beads |
: Micromod, Sicastar-M plain 1,5µm (1/1000: 25µg/ml) |
Video |
: Test1 |
Area |
: 105,9 x 86,7µm (330x270+335+449) |
In this video, the markers move counter clockwise from one corner to the
next.
- 70 - 89sec: The current (given in the picture) flows through
the bottom conducting line (with the circle in the middle). The
markers are collected in the circle.
- 97 - 121sec: The current flows through the right conducting
line. The markers are collected in the right corner.
- 134 - 145sec: The currrent flows through the top right
line. The markers are collected in the top right corner.
- 152 - 168sec: The current flows through the top line. The
markers are collected in the top corner.
- 178 - 200sec: The current is applied to the top left line,
but it is broken. The water starts to boil, because the applied
voltage is heating up the drop of water (the image goes black, because
of the bubbles).
- 201 - 235sec: The current flows through the left line. The
markers are collected in the left corner.
- 241 - 255sec: The current flows through the bottom left
line. The markers are collected in the bottom left corner.
- 261 - 280sec: The current flows again through the bottom
conducting line. The beads are collected in the circle in the middle.
- 295 - 315sec: The current flows through the bottom right
line. The beads are collected in the bottom right corner.
|